翻新墙面时可能会有很多灰尘，不过是可以通过一定的技巧来解决的。墙面上面有灰尘的状况无法立即上漆遮盖，务必先用砂布打磨抛光，将灰尘打磨抛光掉，要不然即使再次刷得话，时间长了非常容易脱皮，也有打磨砂纸研磨的那时候要留意平局，不必凹凸不平的，要不然不好看。1.在墙面从新批腻子打磨抛光，可立即在原墙面打磨抛光一遍不能，在喷乳胶漆，基本上程序流程应当把原墙面铲掉。2.最好贴点壁纸，用沙纸打磨抛光下再喷乳胶漆还可以。要清除原墙面，型线  流水槽模具 景观石 检查井钢模具 保定通风管道 隔离墩模具 保定保洁公司立即刷，会产生墙面空鼓，掉下来。3.在墙面从新批腻子打磨抛光，可立即在原墙面打磨抛光一遍不能，在喷乳胶漆，基本上程序流程应当把原墙面铲掉。
When renovating walls, there may be a lot of dust, but it can be solved through certain techniques. If there is dust on the wall surface that cannot be immediately covered with paint, it is necessary to first polish it with sandcloth to remove the dust. Otherwise, even if it is brushed again, it will easily peel off over time. When using sandpaper for grinding, it is important to pay attention to the draw and avoid unevenness, otherwise it will not look good. 1. When polishing the wall with a new batch of putty, the original wall can be immediately polished once. However, when spraying latex paint, the basic procedure should be to remove the original wall. It's best to stick some wallpaper, polish it with sandpaper, and then spray latex paint. To remove the original wall, immediately brush it, as it may cause hollowing and falling off the wall. 3. When polishing the wall with a new batch of putty, the original wall can be immediately polished once. However, when spraying latex paint, the basic procedure should be to remove the original wall.
能够开展墙面清除下，假如或是不干净得话是你的混凝土墙面抗压强度不足。那样之后进行的墙面会出难题的。在以前应当做防水腻子，后在采用性价比高的内墙腻子粉来刮白。应当没什么的，可是尽量還是用扫帚以内的处理一下墙面，那样实际效果也要好许多。墙的基本上解决主要是指消除墙面的原来室内装修和装饰设计。一般包含墙面原来的墙面漆和腻子粉层的清除.木室内装修.其他表层装饰品(如墙纸)的拆卸等。
Can carry out wall cleaning, if it is not clean, it is due to insufficient compressive strength of your concrete wall. After that, the wall will face difficulties. Previously, waterproof putty should be used, but later, cost-effective interior wall putty powder should be used for whitening. It shouldn't be much, but try to use a broom inside to treat the wall as much as possible, so the actual effect will be much better. The basic solution of walls mainly refers to the elimination of the original interior decoration and decoration design of the walls. Generally, it includes the removal of the original wall paint and putty layer on the wall, wooden interior decoration, and the dismantling of other surface decorations (such as wallpaper).