开荒保洁灰尘大的话，我们可以在地面喷点水，这样在打扫过程中也不至于地面的灰尘到处乱飞。如果是墙面的灰尘，那么刷油漆墙壁、纸贴墙壁主久胳如果灰尘，水滴等芬帮驼溅垢，清定网站建设  伺服液位仪  防撞墙模具 唐山护栏 遮阳网 风电基础模具理维护保养方法是清理掉表层浮灰，可鸡毛掸清扫就可以。石制墙、砖质墙，可以用刀头剃除大块污夏忌渍后，清扫表层沉浮。应用清洁液湿、干湿两用雨刷器，湿拖墙壁再换干拖刮干水迹维持舒爽。留意刷油漆墙壁切勿应用湿冷专用工具，防止灰尘黏贴到墙壁造成环境污染。
If there is a lot of dust in the cleaning process, we can spray some water on the ground to prevent dust from flying around during the cleaning process. If it is dust on the wall, then paint the wall and stick it with paper for a long time. If dust, water droplets, and other debris are splashed on the surface, the cleaning and maintenance method is to remove the floating dust on the surface, which can be cleaned with a feather duster. Stone walls and brick walls can be shaved with a blade to remove large amounts of dirt and avoid summer stains, and then the surface layer can be cleaned. Apply a wet and dry dual purpose wiper with cleaning solution, wet mop the wall, and then replace it with a dry mop to wipe dry water stains to maintain comfort. Be careful not to use damp and cold special tools when painting walls to prevent dust from sticking to the walls and causing environmental pollution.
开荒保洁是一项大工程项目，少人的话会非常累，你能叫上你的家人好朋友一起来帮助，这种高效率会变的更高一些。并且与自己的亲戚朋友一边闲聊一边清扫，时间能过得非常快。残余废弃物清理完之后，下一步便是生产啦。除灰时，我们能吸尘器或是掸子、软毛刷来清除灰尘。需注意清除灰尘从上往下吸，那样高效率能提高许多。在清除门和门套时，要分辨门的材质。
Reclaiming and cleaning is a large engineering project, and with fewer people, it can be very tiring. If you can call on your family and friends to help, this efficiency will become higher. And chatting with one's own relatives and friends while cleaning, time can pass very quickly. After cleaning up the residual waste, the next step is production. When removing dust, we can use a vacuum cleaner, duster, or soft bristle brush to remove the dust. Attention should be paid to removing dust and sucking it from top to bottom, as that can greatly improve efficiency. When cleaning doors and jambs, it is important to distinguish the material of the door.